English – 37
MAINTENANCE
Temperature 0°°
°°
C or colder:
For running the machine in cold weather or powder snow, a
special cover is available, which is mounted on the starter
housing. This reduces the intake of cold air and prevents large
amounts of snow from being sucked in.
CAUTION! If the special winterising kit has been fitted or any
measures have been taken to increase the temperature these
changes must be reversed before the machine is used in
normal temperature conditions. Otherwise there is a risk of
overheating, resulting in severe damage to the engine.
Heated handles
(385XPG, 390XPG)
On models with the designation XPG/G, the front as well as
the rear handle are equipped with electric heating coils.
These are supplied with electricity from a built-in generator on
the chain saw.
Electrical carburettor heating
(385XPG)
On models with the designation XPG/G there is an electrically
heated carburettor. Electrically powered heating prevents ice
formation in the carburettor. A thermostat regulates the
heating so that the carburettor always has the right working
temperature.
IMPORTANT! Any maintenance other than that described in
this manual must be carried out by your servicing dealer
(retailer).
