- Because of the high quality
and precision construction,
none of the angles need setting.
The only parts to adjust are the
guide rail and the height of log
bed, in all three bolts.
- All aluminium components are
anodized, creating a wearing
surface as tough as tempered
steel. It has a low friction
coefficient and is easy to keep
free of pitch and chips.
- Adjustable legs make it easy to
compensate for uneven sites.
- The M7 has a double rachet
mechanism enabling a simple
shift by hand between 1/4” (6.25
mm) and 1/8” (3.12 mm)
increments.
- Clear scales show the height
of the log bed. Extra measuring
rods are available as
accessories to show sawing
height settings.
- The knee joint on the front leg
has a non-slip surface that
facilitates log handling. The joint
also has a mounting hole for
ramps, log tables and the like.
- The cross beam between the
short legs is a significant
stabilization factor.
- The Logosol M7
WoodWorkers Mill will not rust.
Springs are stainless steel and
all steel parts are thoroughly
galvanized.
Technical specifications
Length: 2.75 m (9 ft)
Width: 1.25 m (4 ft)
Width of log bed:0.5 m (1ft 8 in)
Weightwithout saw:38.5 kg (85
lbs)
Max. rec. log diam.: 0.6 m (2 ft)
Max. rec. log length (standard
design): 2.35 m (8 ft)
Max.logweight: 500 kg (1 100
lbs)
Tools needed
(Tools are not supplied with
delivery of the M7
WoodWorkers Mill.)
2 x 10 mm open end wrench
1 x 13 mm open end wrench
1 x 16 mm open end wrench
1 x 17 mm open end wrench
Hexagon socket wrench/Allen
key (metric)
1 x 4 mm open end wrench
1 x 8 mm open end wrench
1 x Try square
Assembly will be facilitated with
a battery-driven drill or
screwdriver with a 10 mm
hexagon socket and a ratchet
key with 10 and 13 mm hexagon
sockets.
The M7 is designed for simple
assembly and adjustment,
mainly because there are fewer
parts and assembly steps than
were needed in earlier models.
Most of the aluminium parts are
anodized making it easier to
force the bolts through the
profile holes. Assemble the M7
on a surface that will not
scratch the surface treatment.
Save time by reading the
entire assembly instruction
before beginning to work. Then
follow the instructions step by
step.
Whenever this symbol
appears, tighten bolt loosely
to allow some movement.
When there is no symbol,
tighten the bolts well.
8
Description Assembly
- No maintenance is needed.
The crank axle runs through
maintenance-free bronze
bearings, the slide rails use low-
friction plastic that has a
working life of several years
thanks to the superbly smooth
surface anodization.
- The settings for sawing
parallel to the grain of conical
logs are quick and simple.
- All accessories for M7 sawmill
fits the M7 WoodWorkers Mill as
well.
