47
5
SETTING EXAMPLE
5
5-2 Bridge mode A (Peer-to-Peer)
Set the AP-12 and the PC as
in the network shown at right.
• IP address of the PC should
already be set. (See Chapter
2 or 3)
• See Chapter 4 (p. 31) for
[AP-12 Manager] details.
Set the following items in [AP-12 Manager] Settings screen (pgs. 33, 34).
• Channel:
Set the desired channel for both the AP-12s.
- Set the channel at least four channels apart to avoid interference if another AP-
12(s), operating on an other channel(s), are within the transmission area.
• Functional mode
Select “Bridge Mode A”.
- Check the “Auto Rate Fallback” (“✓” appears) when communication is unstable.
Set the partner’s MAC address in [AP-12 Manager] Settings screen. (p. 32)
• Remote MAC Address
Set the AP-12 (2)’s MAC Address, “00-90-C7-27-00-02”, to the AP-12 (1).
Set the AP-12 (1)’s MAC Address, “00-90-C7-27-00-01”, to the AP-12 (2).
2. Individual settings
AP-12 (2)
AP-12 (1)
HUB
HUB
Printer
Printer server
wired terminal
wired terminal
wired terminal
Example
00-90-C7-27-00-01
Example
00-90-C7-27-00-02
1. Common settings
AP-12_USA 02.7.26 9:32 AM Page 47 (1,1)
