15
6
DSC OPERATION
5
6
■ MMSI code programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only once.
q Turn power OFF.
w While pushing [MENU], turn power ON to enter MMSI
code programming condition.
e After the display appears, release [MENU].
r Push [MENU] again to enter the DSC menu.
t Rotate [CHANNEL] to select “
SSeett uupp
,” push [CHAN-
NEL•ENTER].
y Rotate [CHANNEL] to select “
MMMMSSII CChheecckk
,” push
[CHANNEL•ENTER].
u Rotate [CHANNEL]
to set
the specific 9-digit MMSI code.
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
• Push [CLR] to cancel and return to the set up menu.
i After entering the 9-digit code, push [CHANNEL•ENTER]
to set the code.
• Returns to the set up menu.
o Push [CLR] or rotate [CHANNEL] to select “
EExxiitt
,” push
[CHANNEL•ENTER].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.
