26
Advanced Menu
Image
Setup
Status/Service
Basic Menu
Color
PC
Video
( Advanced Menu )
MDL: IN3128HD
FW: 0.10
Image:
Color...
Color: adjusts a video image from black and white to fully saturated color. The
color setting applies to video sources only.
Color Temp: cha
nges the intensity of the colors. Select a listed relative
warmth value.
Gamma: se
lect the appropriate gamma from among Video, Film, Bright, and
CRT.
Tint:
adjusts the red-green color balance in the image of NTSC video images.
The tint setting applies to NTSC video sources only.
PC:
Phase: adjusts
the horizontal phase of a computer source.
Tracking: adj
usts the vertical scan of a computer source.
Horz/Vert Position:
adjusts the position of a computer source.
Video:
Overscan: removes noise around the video image.
Setup:
Audio Setup...
Computer 1: selects the
audio input for Computer in 1 signal.
Computer 2: selects the
audio input for Computer in 2 signal.
Video Source: selects the
audio input for video source.
HDMI 1: se
lect the audio input for HDMI 1signal.
HDMI 2: select
the audio input for HDMI 2 signal.
Closed Captioning...
Closed Captions: controls closed captioning. If the source is NTSC and
contains captions on the selected channel, then the projector will display
caption text overlaid on the image. When Closed Captions is off and volume is
muted, closed captioning will appear. Options are: Off, CC1 and CC2.
Image Setup...
Magnify Level: magnifies the image. If the image has been magnified by this
setting, it can be moved by changing the Horz Shift and Vert Shift settings.
Ceiling Mount: tur
ns the image upside down for ceiling-mounted projection.
Rear Project: rev
erses the image so you can project from behind a translucent
screen.
Keypad/Remote Se
ttings...
Blank Key: select
either a solid blue, black or white screen to display when
the blank key on the keypad or remote is pressed.
Custom Key:
allows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Press < or > on the keypad or
remote to choose a different one.
• Blank Screen: displays a solid color screen.
•
Mute: turns off all sound.
•
Source: brings up a menu of available sources.
•
Auto Image: resets the projector to the source.
•
Freeze Screen: pauses the projected image.
