21
STACK menu settings
SUB on both projectors in the STACK MODE dialog, or turn both projectors off
and on again.
● The Main and Sub projectors share these settings:
- AV MUTE (
Operating Guide
→ Temporarily turning off the screen and audio)
- Magnifying feature (
Operating Guide
→ Using the magnify feature)
- ASPECT and OVER SCAN (
Operating Guide
→
IMAGE menu
)
- COMPUTER IN (
Operating Guide
→
INPUT menu
)
- MESSAGE (
Operating Guide
→
SCREEN menu
)
- MY BUTTON (
Operating Guide
→
OPTION menu
)
- TEMPLATE (
Operating Guide
→
SCREEN menu
)
- Lens shutter (
Operating Guide
→
Temporarily shutting the screen
)
- SHUTTER TIMER (
Operating Guide
→
OPTION menu
)
- PbyP (
Operating Guide
→
PbyP
)
<Only for
IN5135
and
IN5145
>
● The following functions are disabled:
- Executing of AUTO KEYSTONE (
Operating Guide
→
SETUP menu
)
- STANDBY MODE (
Operating Guide
→
SETUP menu
)
- AUTO SEARCH (
Operating Guide
→
OPTION menu
)
- Turning on/off AUTO KEYSTONE (
Operating Guide
→
OPTION menu
)
- DIRECT POWER ON (
Operating Guide
→
OPTION menu
)
- AUTO POWER OFF (
Operating Guide
→
OPTION menu
)
- COMMUNICATION TYPE (
Operating Guide
→
OPTION menu
→
SERVICE
→
COMMUNICATION
)
- SOURCE SKIP (
Operating Guide
→
OPTION menu
)
● The input source from the following ports cannot be selected:
-
USB TYPE A
,
USB TYPE B
,
LAN
● <Only for
IN5135
and
IN5145
>
When the projectors are in the PbyP mode, SUB INPUT SOURCE is set to
FOLLOW MAIN UNIT.
● When Intelligent Stack is in use, an error message
will be displayed if an error occurs on any of the
projectors.
When an error occurs, a full dialog will be
displayed on screen. The full dialog changes to a small dialog after
about 20 seconds without any key activity. While the small dialog is
displayed, pressing the ◄ button displays a full dialog again.
The numbers “
1
” and “
2
” above the projector icons represent the Main and Sub
projectors respectively.
Refer to the on-screen messages as shown below and take the necessary
actions to resolve the problem.
(continued on next page)
3.7 Important information for Intelligent Stack (continued)
Full dialog
Small dialog
