8
English
Turning the Power On and Off
Turning the System On
1. The display lights up and the STANDBY indicator goes
out.
2. The System comes on ready to continue in the mode it
was in when the power was last turned off.
Example:
• If the last thing you were doing was listening to a tape in
Deck B, you are now ready to listen to a tape again in
Deck B, or you can change to another source.
• If you were listening to the Tuner last, the Tuner comes
on playing the station it was last set to.
On the Unit
1. Press the (
) STANDBY button.
On the Remote Control
1. Press the (
) button.
Unit/Remote Control
Steps
Explanation/Remarks
or
Turning the System Off
1. The STANDBY indicator lights up and the display is
blank, except for the clock display.
2. Some power (12W) is always consumed even though
power is turned off (Standby Mode).
3. To switch off the Unit completely, unplug the AC power
cord from the AC outlet. When you unplug the AC power
cord, the clock will reset to 0:00 immediately and the
preset radio stations will be erased after a few days.
On the Unit
1. Press the (
) STANDBY button
again.
On the Remote Control
1. Press the (
) button again.
Unit/Remote Control
Steps
Explanation/Remarks
or
EN01-10;MX-D508T[U]/1 98.6.5, 9:37 AM8
