E-30
Item Functions and set values Initial value
WHITE
BALANCE
COLOUR
LEVEL
ENHANCE
LEVEL
PEDESTAL
LEVEL
AUTO
BLACK
CTL
Selects the white balance adjustment function. The white
balance can be adjusted manually or automatically for
light within the colour temperature range of 2500K to
8000K.
• ATW: Auto-Tracking White Balance mode.
This automatically adjusts the white balance.
• AWC: Auto White Balance Controll mode. When the
SET button is pressed, the adjustment
screen appears.
(੬ See page 35.)
To adjust the colour level of the video signal.
• To make colours lighter
… Decrease the v
alue
• To make colours darker … Increase the value
[Set values: –5 to NORMAL to 5]
To adjust the contour enhancing level of the video signal.
• To make the picture quality harder
… Increase the v
alue
• To make the picture quality softer
… Decrease the v
alue
[Set values: –5 to NORMAL to 5]
To adjust the pedestal level of the video signal.
• To brighten picture … Increase the v
alue
• To darken picture … Decrease the value
[Set values: –5 to NORMAL to 5]
This is set when it is difficult to view a dark part of the
image even if gain is boosted by the AGC (automatic gain
control).
ON: When a black level of the image signal is low, a
pedestal level that becomes the standard of black
is automatically elevated, making it easier to view a
dark part.
OFF: AUTO BLACK does not function.
MEMO
• When PEDESTAL LEVEL is set to 5, no function can
take place even if AUTO BLACK CTL is ON.
• When AGC MODE is set to OFF, no function can take
place even if AUTO BLACK CTL is ON.
ATW
NORMAL
NORMAL
NORMAL
OFF
VIDEO ADJUST Screen
MENU SETTING
Adjustments are made on video signals.
E-31
MODE SELECT Screen
Titles, image reversion, etc., are set.
Item Functions and set values Initial value
CAMERA
TITLE EDIT
REVERSE
MODE
ALM.TITLE
SIZE
ALARM
COLOUR
Bring up the CAMERA TITLE, EDIT screen.
(੬ Page 36)
Settings are executed for image reversion.
OFF: Image does not reverse.
R-L: Left and right of the image are reversed.
U-D: Up and down of the image are reversed.
ALL: Up and down and left and right of the image are
reversed.
Set the size of the characters displayed in the case of
alarms.
This sets the colour of an alarm title.
[Set values: WHITE, YELLOW, CYAN, GREEN]
–
OFF
DOUBLE
WHITE
MOTION DETECT Screen
Item Functions and set values Initial value
MODE
Settings are executed about the motion detecting function that emits alarm signals when
there exists any motion in the image. Alarm signals are output from the auxiliary terminals on
the back.
This sets ON/OFF of motion detecting function.
OFF: Motion detecting function does not work.
ON: Motion detecting function works.
OFF
