6 English
Î
STEP 1:
Insert wheels into the body of the unit.
Î STEP 2:
Slide the transport handle into place.
Î STEP 3:
Install the supplied connector to the
unit’s water inlet.
Note: Never attach the garden hose
connector to the unit’s water inlet!
Î STEP 4:
Fasten the quick connect to the high
pressure outlet.
Î STEP 5:
Insert one end of the high pressure
hose into the trigger gun until it locks
audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Î Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
Î STEP 1:
Insert one end of the high pressure
hose tightly into the quick connect on
the unit, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
ASSEMBLY INSTRUCTIONS
Assembly
OPERATING INSTRUCTIONS
