A SERVICE OF

logo

4
Water Supply (Cold Water Only)
Water hose must be at least 3/4 inch in
diameter.
Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
Flow rate can be determined by running
the water for one minute into an empty“
5-gallon container.
Step 1Step 1
Step 1Step 1
Step 1
IMPORTANT PRECAUTIONS – continued
PRECAUTIONS
The water supply temperature must not
exceed 104°F/40°C.
Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
Always prevent debris from being drawn
into the unit by using a clean water source.
Save these instructions!
ASSEMBLY INSTRUCTIONS
Step 2Step 2
Step 2Step 2
Step 2
Step 3Step 3
Step 3Step 3
Step 3