Step 2 Install the Vario spray wand
into the wand extension. Push in and
turn clockwise to lock spray wand in
place.
OPERATING INSTRUCTIONS
4
Step 1 Connect the high pressure hose to the
unit’s high pressure outlet.
Step 3
Connect the garden hose to the
water inlet using the quick connect adapter and
coupling.
Step 4
Connect garden hose to the
cold water source and turn water on
completely.
Step 5 Plug the power cord into the power out-
let. Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from the
spray nozzle.
Step 6 Turn on the pressure
washer (I). The motor starts only if the
trigger of the gun is pulled and shuts off
when the trigger is released.
