1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "H-F" is displayed above the [2]
button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter Hands Free mode
Press the [2] ("H-F") button.
3 Select the Dial Mode
Press the [3] ("DIAL") button.
"Number Dial" is displayed.
4 Enter the telephone number
Press the number [#], [*] and [+](ANG) buttons on the
remote.
•You can input max 32 digits.
• If an incorrect digit is entered, pressing the [4] button will clear
it.
5
Dial an input number
Press the [4] ("CALL") button.
6
Hang up
Press the [2] ("HANG") button.
Canceling the Hands Free mode
Press the [RTN] button.
Inputting the telephone number with number buttons on the
remote, and dialing.
Direct Dial (Function of remote)
3 Select the Phone Book Search Mode item
Press the [2] ("SRCH") button.
Each time the button is pressed the mode switches as follows:
Phone Book Search Mode item Display
Initial Select Mode "Initial Select"
Redial Mode "Redial"
4 Select the initial of a person to dial (In Initial Select Mode)
Press the [FM] or [AM] button.
Initials including no corresponding name will not be displayed.
5 Switch the Name
Press the [4] or [¢] button.
Switching between the Name and Telephone Number
Press the [TI] button.
• Not available if the name has not been stored.
• Not applicable if the text scroll function has been set to Auto (in
menu).
Scrolling the Name and Telephone Number
Press the [SCRL] button.
6 Dial a selected number
Press the [4] ("CALL") button.
7 Hang up
Press the [2] ("HANG") button.
Canceling the Hands Free mode
Press the [RTN] button.
— 35 —
KDC-9023R_U.S_r5.pg 02.12.19 11:39 AM Page 35
