8
INSTALLING/ REMOVING THE BELT HOOK
If desired, attach the belt hook
to the rear of the transceiver
using the 2 supplied screws.
INSTALLING/ REMOVING OPTIONAL ACCESSORIES
Note: Always switch OFF the transceiver power when installing or
removing the optional accessories.
The following accessories can be used with this transceiver:
• KMC-21 Speaker-Microphone
• KHS-21 Headset
• EMC-3 Clip Microphone with Earphone
To install these accessories:
1 Open the SP/MIC tabs on the side of the transceiver.
2 Insert the accessory’s plugs into the SP/MIC jacks.
3 When you remove the accessory from the transceiver, be
sure to cover the SP/MIC jacks with the attached tabs in
order to keep dust and dirt away from the contacts.
Note: Refer to the accessory instruction manuals for detailed
instruction on each of the accessories.
