A SERVICE OF

logo

Open as PDF
next previous
Step 1
Attach Right Base Frame (4) to Rear Frame (1) using two Nuts (144), four Washers (143),
and two Bolts (137).
Attach Left Base Frame (8) to Rear Frame (1) using two Nuts (144), four Washers (143), and
two Bolts (137).
Insert Guide Rods (47) into Rear Frame (1). Next, slide Weight Stack Bumpers (99) onto
Guide Rods (47).
Attach Rear Upright (3) to Rear Frame (1) using two Nuts (144), four Washers (143), and
two Bolts (136).
Assembly
15
Figure 1