A SERVICE OF

logo

The Basics
51
Contents
Back
Next
Index
Attaching the DCS 645 to the Camera Body and Connecting Accessories
Attaching the DCS 645 to the Camera
Body
1 To remove the body cap, rotate the DCS 645
Release button to the left and press, then pivot
the top of the cap away from the DCS 645.
IMPORTANT:
Do not touch or strike the exposed IR filter or
anti-aliasing filter or set it down on a surface.
Do not install the DCS 645 battery or connect the
AC adapter to the DCS 645 until it is mounted on
the camera body.
DCS 645
Release
button