Troubleshooting
www.kodak.com/go/support
25
Print too
light or under-
exposed
IMPORTANT:
Use only the PH series Kodak color cartridge & photo paper kit
for your photo printer. Do not use inkjet paper.
■ Load paper with Kodak logo facing down (page 5).
■ Turn flash off. See camera user’s guide for details.
■ Adjust exposure compensation on camera. See camera user’s guide for
details.
■ Edit picture using Kodak EasyShare software on computer. See EasyShare
software Help for details.
Print too dark,
overexposed, or
discolored
■ Reposition camera for more available light. See camera user’s guide for
details.
■ Use fill flash or change position so light not behind subject. See your
camera user’s guide for details.
■ Turn flash on. See camera user’s guide for details.
■ Adjust exposure compensation on camera. See camera user’s guide for
details.
■ Move so distance between you and subject is within effective flash
range, then take the picture. See camera user’s guide for details.
■ Edit picture using Kodak EasyShare software on computer. See EasyShare
software Help for details.
■ Move photo printer from direct sunlight; operate in
temperature-controlled environment.
■ Do not block cooling vents; keep them clean (page 1).
Status Possible solution
