4-18 A-61504 April 2007
Counter — if you want to add a Counter to the print string, you can
enter one of the following options:
• Initial Value: this value is used to assign the document count for the
next document entering the transport and is incremented sequentially
by the scanner unless another document count is received from the
host. This value is returned in the image header.
• Field Width: used to control the width of the document counter.
Values range from 1 to 9.
Top margin — allows you to define the distance from the lead edge
before the print string begins. Enter the desired amount in the text box.
NOTE: Printing automatically stops 6.3 mm (1/4-inch) from the trailing
edge of the document even if the information has not been
completely printed.
Units — select Inches, Centimeters or Pixels.
Font — two different character styles, referred to as Normal and
Large, are available.
Rotations — you can select either 90, 180 or 270.
Horizontal print position The horizontal print position is set manually. You can change the front
or rear print position. The front printer has 11 print positions and the
rear printer has 8 print positions. See Chapter 4, The Enhanced Printer,
in the User’s Guide for information on changing the horizontal print
position.
Operator Log tab The Operator Log tab provides a listing of any errors that have been
encountered.
You can either save this information to a file by clicking the Save icon,
or click the Copy icon to copy the information to the clipboard.
