. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-16 Using the KODAK Driver for Adobe Photoshop (Macintosh)
Set Auto Balance
7. (Optional) Set AUTO BAL. For most customers the AUTO BAL suggested
setting of “on” will automatically provide the proper “scene” balance.
However, you may need to turn off A
UTO BAL for certain images such
as computer generated graphics or scenes with dominant colors. If
you change this setting, click V
IEW CHANGES to see the effect of the
change.
NOTE: If the original prescan only needs fine color and/or brightness adjust-
ments, do not turn off A
UTO BAL; instead, adjust color and/or brightness as
described in “Change Color Levels” and “Change Brightness” below.
Rotate the Image
8. (Optional) Click 90° CCW, 180°, or 90° CW to rotate the image 90°
counterclockwise (CCW), 180°, or 90° clockwise (CW), respectively.
Click N
ORMAL to display the image as it is oriented in the film or slide
holder.
Sharpen the Image
9. (Optional) Use the SHARPEN popup menu to adjust the level of edge
definition between image elements (pixels). Choose O
FF, NORMAL or
H
IGH; HIGH provides the most definition. Later, when you click SCAN,
the time required to complete the scan will increase slightly if you
select N
ORMAL or HIGH.
NOTE: There is no immediate response when a SHARPEN option is selected;
instead this choice takes effect later when you click P
RESCAN or SCAN.
