A SERVICE OF

logo

Open as PDF
next previous
5. Loading film
1) Turn the power switch (2) "on." Pull the rewind knob
(16) all the way out and the back cover (37) of the camera
will open.
2) Place a roll film into the film cassette chamber (31),
then push the rewind knob all the way back down.
3) Pull the tip of the film out a few centimeters until it
reaches the film take-up spool (39). Then insert the tip
into the slit in the take-up spool.
4) Turn the film advance lever (1) and make sure the holes
in the edge of the film fit on the teeth of the sprocket (40).
Now close the back cover tightly.
5) Raise the film rewind crank (15) and turn it slightly in
the direction of the arrow to reduce slack of the film inside
the magazine.