Connect the camera to the printer using the camera’s USB
cable. The larger plug on the cable is connected to the
printer. Slide open the USB-port cover and insert the
smaller plug of the cable into the camera (1).
Turn the camera on. Open the PictBridge menu (p. 100).
Highlight “Start” in the DPOF-print option in section 3 of
the menu. Press the controller to continue.
103
The DPOF-print option in section 3 allows still images and an index print selected with
the DPOF printing options in the playback menu to be printed from a PictBridge
compatible printer. There is no limit to the number of images that can be printed. See
page 74 on how to create a DPOF file.
Before each print run, check the printer settings; refer to the printer manual. A fully
charged battery should be used when the camera is connected to the printer. The use of
the AC adapter (sold separately) is recommended over the use of the battery.
PRINTING DPOF FILES
Once printing begins, the operation can be canceled by
pressing the controller. The printing finished message will
indicate the end of the operation; turn the camera off to end
the routine.
1
The number of prints in the print run are displayed as well
as the print parameters selected with the menu. Index
prints are counted as one. Press the controller to begin
printing, or press the menu button to return to the
PictBridge screen.
No. of prints
Paper size
Data print
: 7
Print quality
Layout
:start
:Printer setup
:Printer setup
:Printer setup
:Printer setup
Printing finished.
OK
