1-6 Copy Functions
Orientation of Original Document
Orientation of the original must be specified to use the following
functions.
• Duplex Mode
• Split Mode (separate copies from two-sided originals)
• Margin Mode
• Centering Originals
• Border Erase
• Combine Mode
• Memo Pages
• Page Numbering
• Booklet
• Stapling (optional feature)
Placing originals on the platen
Placing originals in the optional document processor
Follow the steps as below to specify the original orientation.
1 Place the original.
2 Press [Function] and then press [T Down].
3 Press [Original Orient.].
4 According to the placed orientation of the original, press [Top Edge
Top] or [Top Edge Left].
5 Press [Close].
6 Configure the functions which require specification of the original
orientation, such as Duplex mode.
7 Press the Start key. Copying begins.
Original [Top Edge Top] [Top Edge Left]
Note The default setting for the original orientation may be
changed. For further details, refer to Orientation of Original
Document on page 3-17.
Original [Top Edge Top] [Top Edge Left]
Set
Back
Top Edge
Select Original
Orientation.
Top Edge
Close
Paper Size
11×8½"
k Original Orientation. can
own at right side of display.
w the steps. If setting mode is
g, incorrect copy will result.
100%
.
Left
Shortcut
Top
