A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 56
priority very low
Sets X-Priority for email alerts to 5.
replyto <email address>
Sets Reply-To address for email alerts.
send
Sends an email using the current settings.
server port <number>
Sets the port used by the SMTP server.
show
Displays email settings.
show history
Displays the last 20 commands entered during the current
CLI session.
show log
Displays the email log.
show statistics
Displays email statistics.
subject <string>
Sets the subject for email alerts.
to <email addresses>
Sets email address to which the email alerts will be sent.
trigger <xio1/xio2> <high/low>
Specifies input name and voltage level to trigger sending
an email.
write
Stores the current configuration in permanent memory.
cli (config-cli) level commands
clear ssh counters
Sets the SSH counters to zero.
clear telnet counters
Sets the Telnet counters to zero.
clrscrn
Clears the screen.
default quit connect line
Restores the default string used to quit the "connect line "
command.
enable level password
Sets or removes the enable-level password by challenging
and prompting.
exit
Exits to the configuration level.
login password Sets or removes the CLI login password by challenging
and prompting.
no clear ssh counters
Restores the IP SSH counters to the aggregate values.
no clear telnet counters
Restores the IP Telnet counters to the aggregate values.
quit connect line <string>
Sets the string used to quit the "connect line " command.
show history
Displays the last 20 commands entered during the current
CLI session.
show ssh
Displays the SSH server settings.
show telnet
Displays the Telnet settings and statistics.
ssh disable
Disables the SSH Server.
ssh enable
Enables the SSH Server.
ssh max sessions <number>
Sets the maximum allowed concurrent incoming SSH
sessions.
ssh port <number>
Sets the local port that the SSH server uses.
telnet disable
Disables the Telnet Server.
telnet enable
Enables the Telnet Server.
telnet max sessions <number>
Sets the maximum concurrent incoming Telnet sessions.
telnet port <number>
Sets the local port that the Telnet server uses.
write
Stores the current configuration in permanent memory.
configure (config) level commands
arp
Changes to the command level for ARP configuration and
status.
clear host <host>
Removes an entry from the DNS Cache
cli
Change to menu level for CLI configuration and status
clrscrn
Clears the screen.