4: Configuration Using Web Manager
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Configurable Pin Settings
There are eight configurable hardware pins on the xPico unit. For each pin, configure
the pin function, communication direction, and activity level. For more information,
see 9 GPIO Interface.
To configure the xPico’s Configurable Pins:
1. On the main menu, click Configurable Pins. The Configurable Pins page opens.
Figure 4-9. Configurable Pins Settings
2. Configure or modify the following fields for each pin:
From the drop-down menu, select the purpose of the
specified pin. See Configurable Pin Functions (below) for
a description of each available function.
Select whether the pin inputs or outputs.
Select the signal active level (Low or High).
Configurable Pin Functions
Monitors input using the 77F0 port or controls output by the
77F0 port.
For DTE device configuration this would be the DCD control
line.
For DTE device configuration this would be the DTR control
line.
Optional control signal that enables toggling between RS232
and RS485 on OEM hardware design.
Optional control signal that enables toggling between RS485
xPico User Guide 32
