A SERVICE OF

logo

2. Connect the keyboard cable to the appropriate keyboard connector, either the
standard keyboard connector 1 or the Universal Serial Bus (USB) connector
2.
Note: Some models will have keyboards with a fingerprint reader. After you
setup and turn on your computer, refer to the Access Help online help
system for information about your fingerprint reader. See “Access
Help” on page 56 for instructions on how to open the online help
system.
3. Connect the USB mouse cable to the USB connector.
4. Connect the monitor cable to the monitor connector on the computer.
v If you have a Video Graphics Array (VGA) Standard monitor, connect the
cable to the connector as shown.
Note: If your model has two monitor connectors, be sure to use the
connector on the graphics adapter.
6 User Guide