Locating parts on the system board
Figure 5 shows the location of the parts on the system board.
1 Microprocessor 12 Front panel connector
2 Microprocessor fan connector 13 Front USB connectors (2)
3 Memory slots (2) 14 Serial (COM 2) connector
4 Thermal sensor connector 15 Front audio connector
5 Diskette drive connector 16 Internal speaker connector
6 24-pin power connector 17 PCI adapter card slots (2)
7 Battery 18 PCI Express x1 adapter card slot
8 Cover presence (Intrusion) switch
connector
19 PCI Express x16 graphics adapter card slot
9 SATA connectors (4) 20 System fan connector
10 Clear CMOS (Complementary
Metal Oxide Semiconductor)/Recovery
jumper
21 4-pin power connector
11 Power fan connector
Removing and reinstalling the front bezel
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel:
1. Remove the computer cover. See “Removing the computer cover” on page 86.
Figure 5. System board parts locations
Chapter 8. Replacing FRUs - Tamdhu computers 89
