A SERVICE OF

logo

4. Press the blue release button and remove the optical drive out of the front of
the computer.
Note: There is a spare retaining bracket 1 attached to the side of the upper
drive cage.
5. Remove the retaining bracket from the optical drive being replaced and install
it on the new optical drive.
6. Slide the new optical drive into the bay from the front until it snaps into
position.
7. Connect the signal cable and the power cable to the optical drive.
8. Go to “Completing the FRU replacement” on page 120.
Figure 26. Removing the optical drive
Figure 27. Retaining bracket for optical drive
Chapter 8. Replacing FRUs - Tamdhu computers 111