A SERVICE OF

logo

4. Open the retaining clips.
5. Position the memory module over the memory connector. Make sure that the
notch 1 on the memory module aligns correctly with the connector key2 on
the system board. Push the memory module straight down into the connector
until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Closing the cover and connecting the
cables” on page 28.
Installing PCI adapters
This section provides information and instructions for installing and removing PCI
adapters. Your computer has a riser card with two PCI adapter connectors.
To install a PCI adapter:
1. Open the computer cover. See “Opening the cover” on page 11.
Chapter 1. Installing options 15