Closing the cover and connecting the cables
After working with options, you need to install any removed parts, close the
computer cover, and reconnect cables, including telephone lines and power cords.
Also, depending on the option that is installed, you might need to confirm the
updated information in the Setup Utility program.
To close the computer cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer.
2. Make sure that the cables are routed correctly before lowering the drive bay
assembly.
3. Lower the drive bay assembly.
4. Close the computer cover.
5. Install any locking devices such as an integrated cable lock as necessary.
6. Reconnect the external cables and power cords to the computer. See “Locating
connectors on the rear of your computer” on page 19.
7. To update the configuration, see Chapter 5, “Using the Setup Utility,” on page
49.
Chapter 3. Installing options 39
