![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/f4/2f4f925d-18e0-4d3f-90ee-47e78678f37f/2f4f925d-18e0-4d3f-90ee-47e78678f37f-bgb.png)
Chapter 4. ThinkServer Remote Management Module Quick
Start
This topic describes how to quickly acquaint with related operations of the Remote Management Module. In
addition, it also describes the advanced features of how to log on the module and options available while
browsing, and how to log out.
Prestart
The Remote Management Module has an embedded Web server and an application with multiple standard
interfaces. This topic describes these interfaces and their usages. You can use the TCP/IP protocol to
access these interfaces.
Note: As the supported functions of the product vary with congurations, refer to the actual product
description.
For more information about the initial settings, see Chapter 3 “Conguration of the ThinkServer Remote
Management Module” on page 5
. The user name in this topic is “lenovo”. Besides “lenovo”, other user
names and passwords are also accepted. The default user name and password are as follows:
• Username = lenovo
• Password = lenovo
The Remote Management Module is accessible through the standard Java-enabled Web browser with
HTTP and HTTPS.
HTTP / HTTPS: The embedded Web server provides full access permission. You can access the Remote
Management Module via encrypted HTTPS protocol or HTTP protocol. When accessing through the HTTP
protocol, note the following:
1. With access to ThinkServer Remote Management Module via the HTTPS protocol, the browser may
prompt you to trust and install the security digital certication, and you just follow the prompts to
import and conrm the certication.
2. In the Internet Explorer
®
6 Web browser on the Microsoft
®
Windows Server
®
2003 operating system,
if using HTTPS protocol to access the Remote Management Module, you need to check Internet
Explorer Enhanced Security Conguration item in the Control Panel ➙ Add / Remove Windows
Components.
3. In IE7 on the Microsoft
®
Windows Server
®
2008 operating system, if using HTTPS protocol to access
the Remote Management Module, you need to do the following amendments to the Congure IE ESC
item of the security information of the server manager, as shown in the following gures:
© Copyright Lenovo 2012
7