A SERVICE OF

logo

184
Chapter 8: Cleaning the waste toner sensor
Cleaning the waste
toner sensor
If you accidently turn the transfer belt on its end, you may
induce a false waste toner full error. You can easily clear
this error and continue printing. If the error continues to
occur after cleaning, then the waste toner is full and the
transfer belt needs to be replaced.
To replace the transfer belt:
1 Place the printer power switch to off (O).
2 Unplug the printer or optional device power cord
from the outlet.
3 Open the multipurpose feeder.
4 Lift the release lever on the printer’s front cover.
5 Open the front cover.
Release lever