Specifications
7-2
Electrical Specifications
Warning: Lexmark recommends that you do not use voltage converters with printers.
Power Requirements
The following tables list the nominal average power requirements (including fuser
power).
Table 7-2: Printer Electrical Specifications
Printer Model Electrical Specification
C510(n) (100 volt model) 100 V at 50/60 Hz
C510(n) (low voltage model) 110
–127 V at 50/60 Hz
C510(n) (high voltage model) 220
–240 V at 50/60 Hz
X422 (low voltage model) 100
–127 V at 50/60 Hz
X422 (high voltage model) 220–240 V at 50/60 Hz
E23x, E33x (low voltage model) 110
–127 V at 50/60 Hz
E23x, E33x (high voltage model) 220
–240 V at 50/60 Hz
Table 7-3: Power Requirements
Printer Model C510
1
X422 E230
State 100 V 120 V 230 V 120 V 230 V 100 V 120 V 230V
Average
continuous
printing
550 W
mono
370 W
color
550 W
mono
370 W
color
550 W
mono
370 W
color
430 W 430 W 340 W 340 W 340 W
Average
continuous
copying
— — — 475 W475 W— — —
Average
continuous
scanning
— — — 125 W125 W— — —
Idle without
Power Saver
(Standby)
150 W 150 W 150 W 75 W 75 W 65 W 65 W 65 W
1
Power requirements for network models may differ.
2
This value is <19 W for units manufactured after 4/30/
2004.
