Audio Menu Navigation
Typical Menu Operation
Sound Mode
1. Press Menu on the Installer remote.
2. Select the Audio Menu Option and press Enter.
3. Go to the Sound Mode option with the
Up/Down/Left/Right arrow keys.
4. Press Enter.
5. Select from the preset sound output options or
make custom sound settings.
6. Press Menu to remove Audio menu from screen.
* Note: Auto Volume is disabled if the Pillow Speaker switch
is set to ‘Pillow’ Speaker’.
Purpose
Enables and disables the Auto Volume option.*
Enables and disables the Clear Voice option.
Gives the Installer the option to set the sound output more
to the Left or to the Right speaker.
Selects preset optimum audio output based on program con-
tent. The Installer can also make custom sound settings.
Note: There are additional menu options accessible with the
down arrow.
