121
Waypoint Information screens with the Go To Waypoint command se-
lected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press EXIT re-
peatedly.
5.
If you're looking by name, there are two options: A. You can spell out
the name in the top selection box. Press ↑ or ↓ to change the first letter,
then press
→ to move the cursor to the next letter and repeat until the
name is correct, then press
ENT|ENT. B. Or you can jump down to the
lower selection list by pressing
ENT, then press ↓ or ↑ to select a way-
point from the list and press
ENT. The waypoint information screen ap-
pears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint (right) is highlighted by the cursor on the Map Page.
A. T
o navigate
to the waypoint, press ENT. (Go To Waypoint com-
mand is already highlighted.) The unit will show navigation infor-
mation to the waypoint.
B. T
o find
the waypoint, press ↓ to FIND ON MAP|ENT. The Map Page
appears with the cursor centered on the found waypoint.
To clear these menus and return to the previous page, press
EXIT re-
peatedly.
