69
Delete a Trail
This is the command used to erase or delete a trail.
1. Press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail name|ENT.
2. Press → to DELETE TRAIL|ENT|← to YES|ENT.
Tip:
You can also delete all trails at once.
1. Press
MENU|MENU|↓ to MY TRAILS|ENT.
2. Press → to
DELETE ALL|ENT|← to YES|ENT.
Display a Saved Trail
The active trail is automatically visible on the plotter display with the
factory default settings. You can selectively turn the trail display off
and on for any saved or active trail.
To turn off trail display:
1. Press MENU|MENU|↓ to MY TRAILS|ENT.
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
ENT.
3. Press ↓ to
ACTIVE|→ to VISIBLE|ENT. To return to the previous page,
press
EXIT repeatedly.
To turn on trail display:
1. Press MENU|MENU|↓ to MY TRAILS|ENT.
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
ENT.
3. Press ↓ to
ACTIVE|→ to VISIBLE|ENT. To return to the previous page,
press
EXIT repeatedly.
Edit a Trail Name
1. Press
MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail name|ENT|ENT.
2. Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Press
ENT. Press EXIT
repeatedly to return to the main display.
Tip:
You can quickly call up the Edit Trail menu by selecting a trail on
the plotter with the cursor. Simply move the cursor over a trail and
a pop-up box appears. Press
WPT and the Edit Trail menu opens.
