N
Note for DV dubbing
• If you press
PAUSE F
at step 5, the tape will rewind to the point a few seconds precedin
the paused point.
hen you press [OK] at step 6, then, it will start dubbing when it comes to the paused point.
• The unit does not send out the output signal to DVC
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
• D
n
nn
m
r
h
n 1 DV
• The unit can onl
accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• I
no video signal is detected
rom the DVC during DVC to HDD or DVD dubbing, the recording will be paused and
” will
lash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Displa
” on page 58.
• Date / time an
cassette memory
ata wi
not
e recor
e
• Pictures with a copy-guard signal cannot be recorded.
• A DV terminal is a terminal that can use the transmission mode conformin
to the IEEE 1394 standards called “Fire
ire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (re
istered trademar
of SONY). It enables di
ital dubbin
between DV devices with little de
radation
• Y
nn
fr
m DV
h HDD
n
DVD
h
m
im
• Please contact the DVC manu
acturer i
you have any problem with it
DUBBING
Use
] to select “Start Rec”, then
press
OK
The dubbing will start
To stop dubbin
;
A) Press [
STOP] on the unit. o
B) Use
] to select “Control”,
then press [OK].
Use [
/
] to select “HDD” /
“DVD”, then press [OK]
Then press [STOP
].
