A SERVICE OF

logo

Open as PDF
next previous
1. Remove the
door in
the left side
cover
by
removing
1 screw.
2. The time
delay relay is now
accessible. Remove
the
relay from its socket and
replace with the
new
relay.
3.
Replace
the door in the
left
side cover.
F. Relay Socket Replacement
1. Remove the toaster
left side cover
by
removing
the
6 screws.
.2.
Remove
the Time
Delay Relay
from the
socket.
3.
Remove
wires one at
a time from
the old relay
socket
and replace
them on the new relay socket.
Remove
the
screws attaching
the old relay
socket to the
toaster
and remove it.
Mount the new
relay
socket
onto the toaster.
3.
Use
the wiring diagram to help
connect
the wires
to
the new
relay socket if necessary.
4. Replace
side cover using
the 6 screws
that were removed.
5. Refer
to MRC #19 for instructions
to
properly
adjust
time
delay
relay.
G. Automatic
Reset High Limit
Reptacement
1. Remove
the right
side cover
by removing
6
screws.
2.
The
Automatic Reset High
Limit
is
now
accessible. Remove wires
one
at a
time
from the old
High Limit and
replace
them on the new
one.
Remove the
screws
attaching
the old High
Limit to the toaster
and remove it.
Mount
the new
High Limit
onto
the toaster.
3. Use
the wiring
diagram to
help connect
the
wires to
the new High Limit if necessary.
4.
Replace
side cover using
the
6 screws
that were removed.
3Aa-s37^
oosT
1n
LI