Display
N
I2:00
h
W
min
% W m TS 0
Start
V
Symbols
The following symbols will appear in the
display depending on the position of
the function selector and/or whether a
sensor has been touched:
Symbols Meaning
% Temperature
W Microwave power setting
u Time of day
T Duration
S Finish
0 System lock
Start Start the microwave
Temperature indicator
N Minute minder
h Hours
min Minutes
Triangle V in the display
I60
% m TS
V
When a sensor is touched, the symbols
of the function at which the function
selector is set will light up and you can
enter settings.
Touch the V or W sensor repeatedly
until the triangle V is underneath the
symbol of the required function in the
display.
Then call up the function with the OK
sensor.
The triangle V will flash for approx.
15 seconds.
The function can only be entered
whilst the triangle V is flashing.
If this period has elapsed, you will
need to call up the required function
again with the OK sensor.
Controls
29
