Microwave function _
The following power levels can be
selected:
80 W, 150 W, 300 W, 450 W, 600 W,
850 W, 1000 W.
^
Turn the function selector to
Microwave _.
The display will show a suggested
power level of 1000 W.
I000
W
W
V
^ Whilst the triangle V is flashing, use
the V sensor to select a lower setting.
After a short while or after touching the
OK sensor to confirm the entry, the
following will appear in the display:
0:00
min
T
V
^
Whilst the triangle V is flashing,
enter the required duration in hours
and minutes (1:30) with the
temperature selector or the W sensor.
After a short while or after touching the
OK sensor to confirm the entry, the
following will appear in the display:
I:30
min
W m T
Start
V
^
Touch the OK sensor to start the
programme.
If no other symbol is selected, the
duration will be visible counting down in
the display.
At the end of the duration
– the T symbol will flash.
– the cooling fan will continue to run for
a while.
– a buzzer will sound if this option is
selected (see chapter "Settings % –
P2"). Touch any sensor to cancel
the buzzer.
The time of day will then appear in the
display. The lighting will switch off.
Operation
35
