4. Select the parity you need and press . You’ll see
Enter Word Length [7-8]: 8
5. Select the word length you need and press . You’ll
see
Enter Stop Bits [1-2]: 1
6. Select the stop bits you need and press . You’ll see
Enter Start (XON) character:
17
7. Enter a number from 1-127 for XON flow control, or 128 for
DTR flow control. You’ll see
Enter Stop (XOFF) character:
19
8. Enter a number from 1-127 for XOFF flow control, or 128
for DTR flow control.
NOTES:
• If you select DTR control (128) as the XON character,
the printer will automatically set 128 (DTR control) for
the XOFF character.
• The Start and Stop characters must be set at 128 (DTR
flow control) for IBM PC equipment.
You’ll see the Configuration Options menu.
Press to exit to the main menu.
9400 Series Programmer’s Manual
3-4
