1-10 Chapter 1: Product Overview
• Lynx Family Control Panel Specification 1.2 on the NCR 74xx Base
System and Client Third party Drivers CD-ROM (Product ID:
D370-0111-0100) or in the video.exe self-extracting Video Drivers
file on the Retail Solutions Specific Third Party Products Drivers and
Patches web site at:
http://www.ncr..com/support/support_drivers_patches.asp?Class=retail_TPP.
• Retail Customer Information Display User’s Guide (BD20-1431-B) on
the NCR Information Products web site at:
http://www.info.ncr.com/eHome.cfm
Ethernet 10/100Base-T LAN Communications
The terminal contains a 10/100Base-T Ethernet PCI connection.
Ethernet 100Base-T is also known as Fast Ethernet. The Boot ROM for
diskless boot functionality is included in the 1 MB system ROM. The
hardware is compatible with the TCP/IP, DHCP, and TFTP protocols
required for remote boot of the platform. Appropriate software must
be used to enable each protocol used over the Ethernet link.
The terminal may be connected to either a 10 Mbps or 100 Mbps
Ethernet connection. The hardware automatically selects the correct
speed (if enabled by software to do so).
The LAN hardware supports wakeup packet capability as defined in
the Device Class Power Management Specification, Network Device
Class (available from the Microsoft
®
Web site).
When the platform is in the Soft OFF state (refer to Advanced Power
Management section that follows), receipt of a Wakeup Packet on the
LAN can return the system to the ON state, if this feature is enabled by
software.
Note: Due to limitations of the LAN controller and the OS, all features
described in the Network Device Class specification may not be
available.
