6
3. Configure the Netopia Cayman
1. Run a Telnet application from the computer on the same network as the Router.
•W
indows users: click on the Start menu, select Run, and in the resulting
entry box, type telnet 192.168.1.1
• Macintosh OS X users:
launch the Terminal application, either from the
Dock or from the Utilities folder, and type telnet 192.168.1.1
• Classic Macintosh OS users:
you need to install the NCSA Telnet
application, included on the Netopia CD, or freely available from user groups
or other freeware sources. Then launch NCSA Telnet and type 192.168.1.1
In the Telnet screens, move from field to field with the arrow keys. Select/execute
items with the Return key, and toggle items (Yes/No, On/Off, ...) with the Tab key
followed by Return.
A/ The Telnet window displays the Main Menu.
B/ The ADSL Line Configuration screen appears.
> If your ISP uses PPPoE, toggle PPP over Ethernet to On with the Tab key followed
by Return. If necessary, change the VPI and VCI to match those used by your ISP.
> If your ISP uses PPPoA, toggle Data Link Encapsulation to PPP and configure the
PPPoA default profile.
Cayman Router
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
ADSL Line Configuration
Trellis Coding Enabled: On
Fast Retrain Enabled: On
Wiring Type AutoSense
Data Link Encapsulation RFC 1483
RFC 1483 Mode Bridged 1483
PPP over Ethernet (PPPoE) Off
Data Circuit VPI (0-255) 8
Data Circuit VCI (32-65535) 35
PREVIOUS SCREEN NEXT SCREEN
Return/Enter takes you back to previous screen.
Select Easy Setup
and press Return.
Make any changes
that your ISP
requires.
If necessary, turn
on PPPoE or
PPPoA.
Select NEXT SCREEN
and press Return.
