A SERVICE OF

logo

4-10 Network Interface
4
Use the numeric keys to enter the scan box’s four-digit I D. code. Then
press [Enter].
If you enter an invalid I.D. code the machine will return to the standby
mode.
5
The machine shows:
01:Select File No.
00:All Documents
6
Press [ ] or [ ] to select the file number (1 to 10) of the file you want to
erase.
If you want to erase all the documents stored in the scan box, enter 00.
7
Press [Enter].
00:All Documents
Erase
Enter
00:All Documents
Not Erase
Cancel
If you want to quit without erasing any documents in the scan box, press
[Cancel].
The machine will return to the standby mode.
If the file you selected in step 6 does not exist the following screen will
appear and you will be redirected to the standby screen.
01:Select File No.
No Document Stored
8
Press [Enter] to erase the file and return to the standby mode.
4.4.2 Printing a list of documents stored in the scan
boxes
To print a list of document stored in your scan boxes, press [Menu], [5], [1],
[2], [0], then [Enter].