20 Copyright © 2007Nokia. All rights reserved.
Please note: car accessories must be installed or repaired by qualified
professionals only. Carefully read the User Guide and Installation Guide
for each system to be installed.
Installation
• Power cable
Identify the terminals for connecting the
four wires that make up the cable harness of
the car kit
Power supply 1
Main supply (red) wire:
The main supply wire must be connected to a main
supply terminal. To do so, locate a main supply
terminal/wire with a constant +12 V power supply.
These are available at the:
• Car battery
• Fuse box
• Car sound system
Ignition-sensing (blue) wire:
To activate the ignition-sensing functionality, the
ignition-sensing wire must be connected to either of
the following:
• The ignition-sensing wire/terminal in the fuse box
• The sound system position-sensing terminal/wire
located behind the sound system
!
Some vehicles do
not come equipped
with an IGNS
connection. This
connection is not
necessary for
operation of the
Nokia Bluetooth
Display Car Kit CK-
15W. The blue wire
can be left
unconnected.
