MP3, iPod, Sat Radio, etc.
Installation
1) Mount the MA-967 amplifier where desired in the left side of your fair-
ing or in a convenient location using the provided screws and nuts, dou-
ble back tape, and/or tie straps. Take into account the length of the
wires going to all of the components prior to mounting.
2) Using the supplied butt connectors, connect your Stereo/NAV unit
power harness to the red and black wires from the MA-967 amplifier.
Plug the 2.5mm mono and the 3.5mm stereo plugs from the MA-967 to
your music source or Stereo/NAV unit. Connect the brown 6-pin plug
from the harness to the brown 6-pin plug from the MA-967 amplifier.
(See Diagram) Note: The MA-967 amplifier can be used with your per-
sonal music device for stereo audio amplification into the drivers hel-
met headset. Simply plug the 3.5mm plug from the connection harness
into your music device and not use the 2.5mm mono plug.
