A SERVICE OF

logo

Be sure that all PANELS are fully
inserted and all CLIPS (A) are
touching the corresponding panel
before you continue . . .
Lock the PANELS with half turn of
a phillips (star) screwdriver to the
CLIPS (A)
STEP 2 : CABINET ASSEMBLY CONTINUED
Insert the BOTTOM and TOP PANEL
SLIGHTLY strech the side panels,
start inserting the BOTTOM (rear)
side rst and work upwards, then
push or hammer with a rubber mallet
around sides.
DO NOT HIT THE CENTER OF
PANELS!
TOP PANEL
BOTTOM PANEL
TOP PANEL
can be identied
by two hangers
Half turn,
DO NOT
FORCE
RUBBER ONLY
4
3