Feature & Display
Features Summary
73
Code Settings How the unit operates
1. Follow steps 1 and 2 on page 72.
2. Enter a 3-digit number except a
number using digits 0 or 7.
3. Press
w
.
4. Press
p
.
#51
Setting the mailbox 1 password
If you wish to prevent other users
from retrieving messages, program
a password for mailbox 1.
BOX1 PASSWORD
ID=
ID=555
1. Follow steps 1 and 2 on page 72.
2. Enter a 3-digit number except a
number using digits 0 or 7.
3. Press
w
.
4. Press
p
.
#52
Setting the mailbox 2 password
If you wish to prevent other users
from retrieving messages, program
a password for mailbox 2.
BOX2 PASSWORD
ID=
ID=555
#46
Setting the friendly reception
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV
MODE=ON [±]
ON
OFF
“ON”: You do not have to press
j for fax reception.
Voice guidance examples:
“
Start transmission.
”
“
Transmission is complete.
”
“
Transmission has failed.
”
“
Transmission has been
interrupted.
”
“
Start reception.
”
etc.
Setting the fax voice guidance
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
●
To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX GUIDANCE
MODE=ON [±]
#47
ON
OFF
ERROR
(The default setting is in bold type.)
“16s”: Up to 16 seconds
“60s”: Up to 60 seconds
●
See page 55 for details.
CHECK
RECORD
ERASE
CHECK
RECORD
ERASE
Changing the recording time for
your own TAD/FAX greeting
message
GREETING TIME
MODE=16s [±]
16s
60s
#55
Greeting message for mailbox 1
(checking, recording or erasing)
BOX1 GREETING
CHECK [±]
See page 63 for details.
#56
Greeting message for mailbox 2
(checking, recording or erasing)
BOX2 GREETING
CHECK [±]
See page 63 for details.
#54
