Copying (continued)
Up to 15 P2 cards worth of data can be copied to the unit's internal HDD. (However, in the case
of 8 GB P2 cards, the data on only 7 P2 cards can be copied.) To see how much space is
available on the HDD (how many cards can be copied), press the [HDD CAP] button and check
the [REMAIN] indicator.
See HDD Capacity (in Number of Cards)
With the unit ON, check how many P2 cards can be copied
• When using 2 GB or 4 GB P2 cards:
Press the [HDD CAP] button once.
In [REMAIN], [E1] lights in orange for a second. After
this, the display corresponds to information given in HDD Capacity (in Number of Cards) ,
below.
• When using 8 GB P2 cards:
Press the [HDD CAP] button twice. In [REMAIN], [E1] and [E2] light in orange for a
second. After this, the display corresponds to information given in HDD Capacity (in Number
of Cards) , below.
HDD Capacity (in Number of Cards)
The [REMAIN] indicator goes out after about 2 seconds.
When P2 cards are inserted, the following operations will be prevented to protect the data, even if
you adjust the write-protect switch. Thus, check the write-protect switch before inserting P2
cards.
Write-protection on P2 cards
HDD capacity indicator
REMAIN
R
G
G
G
G
G
0
2
1
3
4
5 or more
Full useable
(when the cards are not in use)
R
G
G
G
G
R
G
G
G
R
G
G
R
G G G G G
G
: LED lit : LED flashing
R : red G : green
