RQTV0183
17
Specifi cations
AMPLIFIER SECTION
FTC OUTPUT POWER both channel driven
simultaneously
10 % Total harmonic distortion (THD)
60 Hz to 20 kHz 12 W per channel (6 Ω)
RMS OUTPUT POWER both channel driven
simultaneously
10 % Total harmonic distortion (THD)
1 kHz 15 W per channel (6 Ω)
Input impedance
MUSIC PORT 12 kΩ
Output impedance
HEADPHONE 16 to 32 Ω
Phone jack
Terminal Stereo, 3.5 mm
Music Port jack
Terminal Stereo, 3.5 mm
Option port Version 1
XM Ready XM Mini-Tuner and Home Dock
FM TUNER SECTION
Frequency range 87.9 to 107.9 MHz (200 kHz step)
87.5 to 108.0 MHz (100 kHz step)
Sensitivity 0.10 µV (IHF)
S/N 26 dB 1.20 µV
Antenna terminals 75 Ω (unbalanced)
Preset station FM 20 stations
AM 15 stations
AM TUNER SECTION
Frequency range 520 to 1710 kHz (10 kHz step)
Sensitivity
S/N 20 dB (at 1000 kHz) 447 µV/m
CD SECTION
Disc played [8 cm (3˝
) or 12 cm (5˝
)]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 formatted disc)
(3) MP3
Sampling frequency
CD 44.1 kHz
MP3 32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3 32 kbps to 384 kbps
Decoding 16/20/24 bit linear
Pickup
Beam source Semiconductor laser
Wavelength 785 nm
Laser power CLASS 1
Audio output (Disc)
Number of channels 2 channel
Frequency response 20 Hz to 20 kHz (+1, -2 dB)
Wow and fl utter Below measurable limit
Digital fi lter 8 fs
D/A converter MASH (1 bit DAC)
SPEAKER SECTION
Type 1 way, 1 speaker system
Speaker(s)
FULL RANGE 8 cm (3
5
/
32
˝) CONE type 6 Ω
Impedance 6 Ω
Input power (IEC) 15 W (MAX)
Output sound pressure 79.05 dB/W (1.0 m)
Frequency range 55 Hz to 25 kHz (-16 dB)
60 Hz to 20 kHz (-10 dB)
Dimensions (W x H x D) 127 mm x 184 mm x 228 mm
(5˝ x 7
1
/
4
˝ x 9˝)
Mass 1.4 kg (3.1
lb.)
GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 60 W
Dimensions (W x H x D) 212 mm x 184 mm x 308 mm
(8
11
/
32
˝ x 7
1
/
4
˝ x 12
1
/
8
˝)
Mass 3.4 kg (7.5
lb.)
Operating temperature range
+5˚C to +35˚C (+41˚F to +95˚F)
Operating humidity range
5 % to 90 % RH (no condensation)
Power consumption in standby mode 0.5
W (approx.)
Note
1. Specifi cations are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Maintenance
If the surfaces are dirtyIf the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.
NS55_P-En,Sp.indd 17NS55_P-En,Sp.indd 17 3/5/07 11:20:07 AM3/5/07 11:20:07 AM
