Power on
Press [SRC] (PWR: POWER).
Power off
Hold down [SRC] (PWR: POWER).
14
General
This chapter explains how to turn on or off the power, how to adjust the volume, etc.
CQ-DX200W
You can remove the face plate to prevent it from being
stolen.
Removing
1
Turn off the power. (a page 14)
2
Press [] (Release).
(The face plate disen-
gages with a click
when it is removed.)
3
Put the face plate in the case.
Mounting
1
Slide the left side of the face plate in
place.
2
Press the right end of the face plate
until “click” is heard.
Power On/off
(PWR: POWER)
Cautions
¡This face plate is not waterproof. Do not expose it to
water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or
nearby areas where the temperature rises to high
levels.
¡Do not touch the contacts on the face plate or on the
main unit, since this may result in poor electrical
contacts.
¡If dirt or other foreign substances adhere on the
contacts, wipe them off with a clean and dry cloth.
Notes:
¡The volume level can be set independently for each
source. (For radio, one volume setting for AM, one
volume setting for all FMs)
¡This unit memorizes individual volume levels for each
source. Make volume adjustments of each source
appropriately to prevent large volume fluctuation when
the source is changed.
qUp
wDown
Setting Range: 0 to 40
Default: 18
Volume Adjustment
(VOLUME)
Face Plate Removing/Mounting
(ANTI-THEFT SYSTEM)
