55
BASIC
OPERATIONS
On-Hook Dialing
(see Note 1) (see Note 2) (see Note 3)
For On-Hook Dialing, follow the steps below.
Make sure that the FAX Mode indicator is ON. If not, press to select the "FAX MODE".
1
Set the original(s) face up on the ADF.
2
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad or use
Directory Search Dialing.
Ex:
4
When you hear a beep,
NOTE
1. If you need a special access number to get an outside line, dial it first then press to enter a
pause (represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. On-Hook Dialing is only available from the ADF. If you need to send pages from a Book or originals that can not
be fed through the ADF, make a copy on the Platen Glass first then use the ADF for Voice Mode Transmission.
12
45
78
0
3
6
9
abc..
+-
MONITOR
FAX
START
ENTER STATION(S)
THEN PRESS START 00%
MONITOR
5 5 5 1 2 3
4
START
TONE
Sending Documents
